01
A new IP for one profile
Paste a string with a new token into that profile’s cell.
paste_new_ip.txt
gw.ludaxproxy.com:7777:resi-lx_k3m9q2p7xa:YOUR_PASSWORD-session-shop1b-time-1000-country-usGoLogin proxy setup: paste a residential IP into every profile
Two GoLogin profiles on one IP look like one person with two accounts. Paste a Ludax string into each profile and each gets its own home IP, kept for the session, with time zone and location following it by themselves.
- A home IP per profileone paste each
- Time zone followsset by GoLogin from the IP
- Checked before loginwhoami shows the IP type
Stuck on the first profile? Send a screenshot on Telegram and we fix it with you. Testing costs $0.99 for 1 GB. Steps from Gologin’s own documentation; Ludax values checked against the gateways — November 2026
KEY FACTS
- GoLogin takes a pasted proxy as
host:port:login:password, orsocks5://login:password@host:portfor SOCKS5. - Paste the whole string rather than typing the host: GoLogin’s manual form asks for an IP address in its IP field, while a pasted string carries the name
gw.ludaxproxy.com. - Choose Your proxy, not Gologin proxy: that one is GoLogin’s own traffic.
- Fill timezone based on the external IP and Fill geolocation based on the external IP are on by default: with a Ludax country in the password, the profile looks local.
- One token per profile (
-session-shop1-time-1000) keeps one IP for up to 1000 minutes. A red check is usually the login; 30 failed logins in 5 minutes block your IP for 10 minutes.
Using an AI assistant? Give it this guide
One Markdown file with everything ChatGPT, Claude, Cursor or Copilot needs to write working Ludax code for GoLogin: the connection format, the gateways in force, sessions, errors and tested examples. Copy it into the chat, or paste this prompt:
Read https://ludaxproxy.com/docs/gologin.md and set up my GoLogin profiles with Ludax proxies.
GoLogin proxy strings for your Ludax plan
Pick the product, protocol and country, name the profile, and copy a string GoLogin reads in one paste. Your username and password stay in this browser tab and are never sent anywhere.
gologin-paste.txt
Paste goes into the profile’s Proxy & Location cell or the Your proxy tab. 5 profiles is the list for Update proxy. The profile name becomes the session token.
No username yet?
Get one in a minute with the smallest plan, paste it in the field above, and these become your real values.
See what the sites see, before you log in
Ten seconds that tell you whether the profile is on a home connection in the right country, before an account ever sees it.
Open https://api.ludaxproxy.com/whoami in the profile before it goes near an account. It answers with what a site sees:
whoami (your values will differ)
{
"ip": "203.0.113.24",
"country": "United States",
"type": "residential",
"tls_profile": "Chrome 154",
"latency_ms": 418
}| Field | Good | If not |
|---|---|---|
type | residential: a home connection, not a data centre. | Anything else: do not log in; check the port and the product prefix. |
country | The country in your password. | Another country: the city or region had no free exit; check the spelling of the codes. |
ip | The same on every reload while the session runs. | It changes: the profile has no -session- token, or shares one with another profile. |
tls_profile | The browser GoLogin’s handshake looks like. | Expected: GoLogin runs a real browser engine. |
- Prepaid, no subscriptionyou pay for GB, plans run 30 days
- Crypto checkoutBTC, USDT, ETH and more
- Bodies never storedwhat you send is not kept
How to add a proxy to a GoLogin profile
In the list for speed, in the settings for a new profile. Labels as in GoLogin’s documentation; menus can move a little between versions.
Copy your string
From the generator above, tab Paste.
Fastest: paste into the list
On All profiles, paste the string straight into the profile’s Proxy & Location cell; GoLogin adds the proxy with all its details.
Or open the Proxy tab
For a new profile click Add profile; for an existing one the three dots → Settings. Open Proxy and pick Your proxy.
Paste the string
For a plain
host:port:login:passwordstring GoLogin picks the protocol itself;socks5://at the start makes it SOCKS5 on port 7575 (Premium 1080).Read the check
GoLogin checks at once: green works, red does not.
Run the profile
Click Create Profile (or save), run it and open
https://api.ludaxproxy.com/whoami.
paste_residential.txt
gw.ludaxproxy.com:7777:resi-lx_k3m9q2p7xa:YOUR_PASSWORD-session-shop1-time-1000-country-uspaste_socks5.txt
socks5://resi-lx_k3m9q2p7xa:YOUR_PASSWORD-session-shop1-time-1000-country-us@gw.ludaxproxy.com:7575Official docs: Gologin: adding proxies
Update proxies for many GoLogin profiles at once
One string per profile, one paste for all of them.
- On All profiles select the profiles.
- Click Proxy in the bulk actions.
- Paste one string per line and click Update proxy.
paste_5_profiles.txt
gw.ludaxproxy.com:7777:resi-lx_k3m9q2p7xa:YOUR_PASSWORD-session-shop1-time-1000-country-us
gw.ludaxproxy.com:7777:resi-lx_k3m9q2p7xa:YOUR_PASSWORD-session-shop2-time-1000-country-us
gw.ludaxproxy.com:7777:resi-lx_k3m9q2p7xa:YOUR_PASSWORD-session-shop3-time-1000-country-us
gw.ludaxproxy.com:7777:resi-lx_k3m9q2p7xa:YOUR_PASSWORD-session-shop4-time-1000-country-us
gw.ludaxproxy.com:7777:resi-lx_k3m9q2p7xa:YOUR_PASSWORD-session-shop5-time-1000-country-usEvery line has its own token, so every profile its own IP. Check one profile first: a wrong password on every line would fail every check, and 30 failed logins in 5 minutes block your IP for 10 minutes.
02
Profiles without an account
For browsing or scraping, leave the session out: each new connection gets a new home IP.
paste_rotating.txt
gw.ludaxproxy.com:7777:resi-lx_k3m9q2p7xa:YOUR_PASSWORD-country-usGoLogin time zone and geolocation from the proxy
GoLogin reads the exit’s location and sets the profile to match. Choose that location in the Ludax password.
The Timezone tab has Fill timezone based on the external IP and the Geolocation tab Fill geolocation based on the external IP, both on by default. Leave them on: the profile then follows whatever country and city you put in the password.
01
A city for accounts tied to a place
When the 1000 minutes end the profile gets a new IP; with the city fixed it stays local, and GoLogin follows it.
paste_city.txt
gw.ludaxproxy.com:7777:resi-lx_k3m9q2p7xa:YOUR_PASSWORD-session-shop1-time-1000-country-de-state-by-city-munich02
Premium: an exit device that matches
On Residential Premium, -os-windows (or macos, android, ios) picks the device behind the IP.
paste_premium_windows.txt
gw.ludaxproxy.com:8080:premi-lx_k3m9q2p7xa:YOUR_PASSWORD-session-shop1-time-1000-country-us-os-windowscheck_ip.txt
https://api.ludaxproxy.com/whoamiEstimate the GB for your GoLogin profiles
Pay for what your profiles use, not for a subscription. Your own measurement, multiplied out.
Enter the MB one profile uses in a day.
- Work one profile for a normal day through Ludax.
- Read how much the plan used in your Ludax dashboard.
- Put that number here; the rest is multiplication.
Every account type uses traffic differently, so we do not guess a number for you. Plans run 30 days from activation; buy the size the estimate gives, and top up if it runs short. Every size and price: pricing.
GoLogin proxy red or “Proxy doesn’t work”: fixes
All gateway answers: status codes.
| You see | Why | Fix |
|---|---|---|
| The check turns red | Usually the login (407): a typo, resi- on a Premium port or the reverse, or a plan with no data left. | Copy the string again; check the plan. See every 407 cause. |
| “Proxy doesn’t work” when the profile starts | GoLogin checks again at launch and the proxy failed. | Fix the Ludax string in the profile, then start it again. |
| The host is not accepted in the form | The manual form’s IP field expects an IP address. | Paste the whole string into the Proxy & Location cell or the Your proxy tab. |
| Every profile fails after a bulk update | The same wrong password on every line: 30 failed logins in 5 minutes block your IP for 10 minutes. | Fix the password, wait 10 minutes, test one profile first. |
| Wrong time zone in the profile | The fill-from-IP toggles were turned off. | Turn Fill timezone based on the external IP back on. |
GoLogin proxy FAQ
Short answers; the full option list is in proxy authentication.
01How do I add my own proxy to GoLogin?
Copy a Ludax string such as gw.ludaxproxy.com:7777:resi-lx_k3m9q2p7xa:YOUR_PASSWORD and paste it into the profile’s Proxy & Location cell, or into Proxy, Your proxy in the profile settings. GoLogin checks it at once.
02Can I type gw.ludaxproxy.com into GoLogin’s proxy form?
GoLogin’s documentation says the IP field of its manual form takes an IP address. Paste the full string instead: it carries the host name.
03How do I paste a SOCKS5 proxy into GoLogin?
Write it as socks5://login:[email protected]:7575 (Residential Premium: port 1080).
04Does GoLogin match the time zone to my proxy?
Yes, by default: Fill timezone based on the external IP and Fill geolocation based on the external IP are on. Put the country (and city) you need in the Ludax password and the profile follows.
05Gologin proxy or my own proxy?
With Your proxy, the profile uses only your Ludax plan; Gologin proxy is GoLogin’s own traffic. Pick Your proxy for Ludax.
06Is there a free trial?
No: the smallest plan is the test. 1 GB of Residential costs $0.99, with no subscription, and your username stays the same when you buy more.
[ START NOW ]
Paste your first Ludax string into GoLogin
- Pick a plan. No subscription; the username stays when you buy more.
- Copy a string from the generator above.
- Paste it into Proxy & Location and wait for the green check.
Stuck? Send a screenshot of the proxy cell on Telegram and we fix it with you. Every plan and price: pricing.